Revealing the changes of bacterial community from water source to consumers tap: A full-scale investigation in eastern city of China

This study profiled the bacterial community variations of water from four water treatment systems, including coagulation, sedimentation, sand filtration, ozonation-biological activated carbon filtration (O₃-BAC), disinfection, and the tap water after the distribution process in eastern China. The results showed that different water treatment processes affected the bacterial community structure in different ways. The traditional treatment processes, including coagulation, sedimentation and sand filtration, reduced the total bacterial count, while they had little effect on the bacterial community structure in the treated water (before disinfection). Compared to the traditional treatment process, O₃-BAC reduced the relative abundance of Sphingomonas in the finished water. In addition, ozonation may play a role in reducing the relative abundance of Mycobacterium. NaClO and ClO₂ had different effects on the bacterial community in the finished water. The relative abundance of some bacteria (e.g. Flavobacterium, Phreatobacter and Porphyrobacter) increased in the finished water after ClO₂ disinfection. The relative abundance of Mycobacterium and Legionella, which have been widely reported as waterborne opportunistic pathogens, increased after NaClO disinfection. In addition, some microorganisms proliferated and grew in the distribution system, which could lead to turbidity increases in the tap water. Compared to those in the finished water, the relative abundance of Sphingomonas, Hyphomicrobium, Phreatobacter, Rheinheimera, Pseudomonas and Acinetobacter increased in the tap water disinfected with NaClO, while the relative abundance of Mycobacterium increased in the tap water disinfected with ClO₂. Overall, this study provided the detailed variation in the bacterial community in the drinking water system.     

An investigation of changes in water quality throughout the drinking water production/distribution chain using toxicological and fluorescence analyses

Changes in water quality from source water to finished water and tap water at two conventional drinking water treatment plants(DWTPs) were monitored.Beside the routine water quality testing,Caenorhabditis elegans-based toxicity assays and the fluorescence excitation–emission matrices technique were also applied.Both DWTPs supplied drinking water that met government standards.Under current test conditions,both the investigated finished water and tap water samples exhibited stronger lethal,genotoxic and reprotoxic potential than the relative source water sample,and the tap water sample was more lethal but tended to be less genotoxic than the corresponding finished water sample.Meanwhile,the nearly complete removal of tryptophan-like substances and newly generated tyrosine-like substances were observed after the treatment of drinking water,and humic-like substances were identified in the tap water.Based on these findings,toxic pollutants,including genotoxic/reproductive toxicants,are produced in the drinking water treatment and/or distribution processes.Moreover,further studies are needed to clarify the potentially important roles of tyrosine-like and humic-like substances in mediating drinking water toxicity and to identify the potential sources of these contaminants.Additionally,tryptophan-like fluorescence may be adopted as a useful parameter to monitor the treatment performance of DWTPs.Our observations provided insights into the importance of utilizing biotoxicity assays and fluorescence spectroscopy as tools to complement the routine evaluation of drinking water.     

On-going nitrification in chloraminated drinking water distribution system (DWDS) is conditioned by hydraulics and disinfection strategies

Within the drinking water distribution system (DWDS) using chloramine as disinfectant, nitrification caused by nitrifying bacteria is increasingly becoming a concern as it poses a great challenge for maintaining water quality. To investigate efficient control strategies, operational conditions including hydraulic regimes and disinfectant scenarios were controlled within a flow cell experimental facility. Two test phases were conducted to investigate the effects on the extent of nitrification of three flow rates (Q = 2, 6, and 10 L/min) and four disinfection scenarios (total Cl₂=1 mg/L, Cl₂/NH₃-N=3:1; total Cl₂=1 mg/L, Cl₂/NH₃-N=5:1; total Cl₂=5 mg/L, Cl₂/NH₃-N=3:1; and total Cl₂=5 mg/L, Cl₂/NH₃-N=5:1). Physico-chemical parameters and nitrification indicators were monitored during the tests. The characteristics of biofilm extracellular polymetric substance (EPS) were evaluated after the experiment. The main results from the study indicate that nitrification is affected by hydraulic conditions and the process tends to be severe when the fluid flow transforms from laminar to turbulent (2300<Re<4000). Increasing disinfectant concentration and optimizing Cl₂/NH₃-N mass ratio were found to inhibit nitrification to some extend when the system was running at turbulent condition (Q = 10 L/min, Re = 5535). EPS extracted from biofilm that was established at the flow rate of 6 L/min had greater carbohydrate/protein ratio. Furthermore, several nitrification indicators were evaluated for their prediction efficiency and the results suggest that the change of nitrite, together with total organic carbon (TOC) and turbidity can indicate nitrification potential efficiently.     

生态调控后贵州花溪水库浮游植物群落结构的变化特征及影响因素

为了解生态调控后花溪水库浮游植物功能群变化特征与环境因子的关系,基于浮游植物功能群、NMDS（非度量多维尺度分析）、RDA（冗余分析）、Pearson相关性分析方法,于2017年3月-2018年3月逐月对浮游植物群落结构与水环境指标进行采样分析.结果表明:①生态调控前,花溪水库共鉴定浮游植物4门18种,共归类出10个功能群,且功能群H1占绝对优势,其代表藻种为水华束丝藻（Aphanizomenon flosaquae）;生态调控后,共鉴定浮游植物6门66种,共归类出20个功能群,主要优势功能群为B/Lo,其代表藻种为小环藻（Cyclotella sp.）和多甲藻（Peridinium sp.）.②生态调控后,花溪水库优势功能群结构发生了变化,其变化特征为B/Lo（春季）→D/B/Lo/X2/N/P（夏季）→D/B/Lo/N（秋季）→D/MP/B/Lo/W1/W2（冬季）.功能群B的生物量在春季达到峰值（3 056.3 μg/L）,与其对低营养环境有良好的耐受性有关;功能群Lo的生物量在秋季达到峰值（2 900.9 μg/L）,与组成功能群Lo的甲藻特性有关.③RDA结果表明,生态调控前影响浮游植物生长的环境因子为SD（透明度）、ρ（DIN）（DIN为无机氮）;生态调控后影响浮游植物生长的环境因子为WT（水温）、ρ（DO）、ρ（DIN）.研究显示,生态调控后花溪水库功能群结构发生了明显变化,影响功能群变化的主要环境因子为WT和ρ（DO）.      

洞庭湖区南汉垸水体浮游植物群落结构特征及其影响因素

环境要素的变化对浮游植物的群落结构和功能具有重要影响.为揭示洞庭湖南汉垸湖区浮游植物群落结构特征及其影响因素,分别于2017年11月（关泵封水期）和2018年6月（开泵放水期）在洞庭湖区典型堤垸——南汉垸进行了采样调查,并对调查区域内的浮游植物及主要水环境因子进行了系统监测和分析.结果表明:①调查期间共检出浮游植物8门62属,主要隶属于绿藻门（Chlorophyta）、硅藻门（Bacillariophyta）和蓝藻门（Cyanophyta）,浮游植物分布表现出较为显著的时间差异性,11月浮游植物的丰度为8.34×106~3.02×108 L-1,6月为1.13×106~2.04×107 L-1.②Shannon-Wiener多样性指数（H'）介于1.10~3.24之间,Margalef丰富度指数（d）介于1.42~6.40之间,Pielou均匀度指数（J）介于0.48~0.87之间,多样性评价表明,南汉垸整体上介于轻污染与β-中污染之间,局部采样点为α-中污染.③PCA（主成分分析）结果表明,ρ（TN）、ρ（TP）和ρ（NH₄+-N）为南汉垸水体的主要污染因子.④RDA（冗余分析）结果表明,南汉垸浮游植物群落结构分布与pH、ρ（NH₄+-N）及ρ（TN）呈正相关,与WT（水温）呈负相关.研究显示,南汉垸水体介于轻污染与β-中污染之间,营养状态及浮游植物群落结构在时间上差异较大.      

关于在长江经济带布局以水质改善为目标的流域生态缓冲体系的思考

生态缓冲带能够有效减缓流域内的人类活动或自然过程对水环境和水生态系统的影响.在长江经济带构建流域生态缓冲体系,对长江生态保护修复具有十分重要的意义.讨论了构建流域生态缓冲体系涉及的生态缓冲带位置选择、缓冲体系所占最低面积比率、宽度划定等一些基本的原则要求;利用卫星遥感影像数据,提取各汇水单元的地形特征、土地利用类型特征、土壤类型、土壤侵蚀强度、水文水系等数据,对长江经济带流域生态缓冲体系进行布局.结果表明:①长江经济带内林草地是主要土地利用类型,占区域总面积的62.46%,但是分布很不均匀,主要集中在西部高地和中下游的丘陵地带,在人口密集、农田密集的区域分布偏少;城镇用地主要集中在长江中下游地区.②土壤类型空间差异显著,浙江省、江苏省、湖南省、江西省及安徽省大部分区域的土壤多是黏性比较大,污染物迁移能力较低;而污染物迁移能力较强的砂质土或者土层较薄的山地草甸土主要分布在四川省北部、西北部.水力侵蚀、风力侵蚀和冻融侵蚀均有分布,且以水力侵蚀为主,建议在中度及以上侵蚀强度区域尽量减少污染源,重点布置缓冲带,增加该区域的缓冲力度.③长江经济带范围内可以利用的中小型湿地、小型河流支浜的面积至少有1.4×104 km2,再结合林草缓冲带,就可以形成一个生态缓冲体系.④在土地利用类型分布结果基础上,叠加土壤侵蚀强度和水系分布,将污染源区、中度及以上侵蚀强度区、水体区作为缓冲对象,建立缓冲体系的重点区域,总面积约14.26×104 km2,占长江经济带总面积的6.95%.对照欧美地区的研究,6.95%的缓冲体系面积占比是偏低的,需要在长江经济带开展深入研究来确定适宜的缓冲体系面积比,推进长江经济带流域生态缓冲体系的构建.      

人工智能技术对长江流域水污染治理的思考

随着经济的快速发展和城市化进程的不断加速,促使水污染严重的长江流域需从污染物去除过程的建模与优化、污水处理过程的优化控制、水污染监测系统的构建开展水污染治理研究.传统的水污染处理技术存在污染物去除效率预测精度较低、污水优化控制成本较高、水污染监测滞后效应严重的问题.人工智能技术能够有效克服上述问题,因此通过梳理国内外学者利用人工智能技术在污水污染物去除过程的建模与优化、污水处理过程的优化控制及水污染监测系统的构建等方面的研究成果,为全面加强长江流域水污染治理能力提供科学可靠的技术指导.结果表明:①利用人工神经网络技术（径向基神经网络、多层前馈网络-人工神经网络、多层感知器神经网络）对污水污染物去除过程进行建模与优化,为精确预测长江流域重金属（Cr、Cu）、营养盐（TN、TP）、持久性有机污染物〔PBDEs（多溴二苯醚）、HCH（六氯环己烷）〕的去除率提供重要参考价值.②采用污水处理的自动控制技术与人工智能技术（递归神经网络、支持向量机、模糊神经网络等）构建污水智能控制系统,为长江流域实现高效节能的污水优化控制提供重要的技术指导.③利用在线监测仪器和人工智能技术（小波神经网络、多元线性回归-人工神经网络、叠层去噪自动编码器等）建立水污染智能监测系统,为解决长江流域水污染监测响应滞后问题提供有力的技术支持.因此,人工智能技术对长江流域提高污水污染物去除率,降低污水优化控制成本,提升水污染监测时效性具有重要的推广价值.      

成都平原核心区土壤砷空间变异特征及影响因素

掌握土壤污染物的空间变异特征及其影响因素是开展土壤污染防治的前提.基于189个表层（0~20 cm）土壤样品,运用经典统计学和地统计学方法分析了成都平原核心区土壤中w（As）的空间分布特征,并探讨了成土母质、水系和土地利用方式对土壤中w（As）的影响.结果表明:①研究区土壤中w（As）在3.74~35.32 mg/kg之间,平均值为14.64 mg/kg,其中超过GB 15618-2018《土壤环境质量农用地土壤污染风险管控标准（试行）》风险筛查值的采样点仅占总采样点的7.53%.②地累积指数分析结果表明,研究区土壤As处于无污染至轻度污染状态.③研究区土壤中w（As）总体呈西高东低的趋势,高值主要分布在都江堰市的南部、崇州市的东北部以及邛崃市与新津县接壤处.土壤As的块金系数为26.60%,属于中等程度变异,受结构性因素和随机性因素的共同影响.④由于人类活动的增强,成土母质对土壤中w（As）的影响已经不显著.距水系越近,土壤中w（As）越高.土地利用方式对土壤中w（As）空间变异的影响程度最大,不同土地利用方式下土壤中w（As）差异显著,表现为园林地>农林地>水稻-小麦轮作>水稻-油菜轮作>水稻-蔬菜轮作.研究显示,成都平原核心区土壤中w（As）总体偏低,高值区主要分布在都江堰市的南部、崇州市的东北部和邛崃市与新津县接壤一带;土地利用方式对土壤中As空间变异的影响超过水系和成土母质.      

轻质高强多功能点阵夹层结构研究进展

根据材料类型和点阵结构,对点阵夹层结构进行了分类简述,并从静态、动态力学性能上,分析了各类点阵夹层结构的优缺点。简要叙述了设计过程中,综合考虑材料、结构以及功能等影响因素,针对不同使用工况的要求,可对各影响因素进行匹配设计,以实现传热特性、电磁波屏蔽特性、声学特性等不同的功能性需求。然后介绍了复合点阵夹层结构(嵌锁组装、模具热压成形、穿插编织)和金属点阵夹层结构(冲压成形、挤压线切割、拉伸网折叠、搭接拼装、熔模铸造以及增材制造)的主要制造工艺。最后提出如何将设计因子与多目标进行匹配及优化设计,是轻质高强点阵夹层结构的重点研究方向,轻质高强点阵夹层结构将朝多材料及多结构复合方向发展,开发新的制造工艺,提高费效比,是点阵夹层结构材料需解决的问题。     

布置压电阵列元件薄壁结构的振动控制技术研究

目的形成布置压电阵列元件薄壁结构的建模方法,通过时域仿真验证控制效果。方法通过有限元软件建立了布置压电阵列元件薄壁结构的动力学模型,采用ANSYS APDL参数化语言编写程序,自动生成带有压电阵列分流电路的薄壁结构有限元模型,并开展了动力学仿真研究。结果实现了连接分流电路的周期压电结构时域仿真,验证了压电阵列分流阻尼技术在薄壁结构振动控制中的有效性。结论所形成的布置压电阵列元件薄壁结构的建模和仿真方法,可为航空薄壁结构的振动控制提供技术支持。